FLIR DNR700 Series - Auto Scan

Connecting a PTZ Camera (DNR700 Series)
21
• Under No., select the number of the pattern you would like to go to and click
.
21.2.4 Auto Scan
An auto scan automatically cycles between a left and right point.
To create a new auto scan:
1. Click
to open the aux menu.
2. Click the Border tab.
3. Move the camera into the desired left position and click Left.
4. Move the camera into the desired right position and click Right.
To run an auto scan:
• Click .
#LX400082; r. 1.0/38226/38226; en-US
172