How to turn off beeping during motion detection on my FLIR M3100?
If your FLIR DVR beeps during motion detection, open the Main Menu and click System>Motion. In the Buzzer drop-down, select Off. Click Apply.
What to do if there is no picture on monitor/TV connected to FLIR M3100 DVR?
If there is no picture on your monitor/TV after connecting it to the FLIR DVR, power off the monitor/TV and DVR. Then, power on the monitor/TV first, followed by the DVR. Ensure that you have selected the correct input channel on your monitor/TV to which the DVR is connected. Also, check the video cable connection to both the DVR and the monitor/TV to make sure it is not loose or disconnected.
How to fix no picture on certain channels of my FLIR M3100?
If there is no picture on selected channels or the camera picture is not being displayed on your FLIR DVR, check the camera video cable and connections. Disconnect and reconnect the cable at both the DVR and the camera. You can also try moving the camera to another channel or using a different cable.
General| Video Output | HDMI, VGA |
|---|---|
| Operating System | Embedded Linux |
| Video Compression | H.264 |
| Storage | Internal HDD |
| Network Interface | Ethernet |
| Operating Temperature | -10°C to 55°C |
Covers essential safety guidelines for operating and maintaining the system.
Safety considerations during product installation, servicing, and daily use.
Highlights the main features and technical capabilities of the M3100 series.
Identifies the components included in the M3100 series system package.
Details the controls and indicators on the front panel of the M3100 series.
Explains the function of each port on the rear panel of the M3100 series.
Step-by-step guide for connecting cameras, mouse, network, and monitor.
Covers power connection, firmware upgrade, time setting, and system information.
Explains how to use the mouse for system navigation and interaction.
Details the functions of the remote control and how to set its address.
Describes the on-screen display, quick menu, navigation bar, and camera toolbar.
Covers adjusting color settings, using the navigation bar, playback, and virtual keyboard.
Guide to setting the system's date, time, and time zone for accurate timestamps.
Explains continuous vs. motion recording and main vs. sub stream usage.
Covers setting scheduled recording and configuring hard drive overwrite.
Instructions for playing back video from the hard drive and USB drives.
Details the playback controls and interface elements for reviewing footage.
Guide on formatting USB thumb drives for data backup.
Steps for backing up video clips and viewing backup files on PC/Mac.
Managing user accounts, changing passwords, and adding/deleting users.
Covers creating, modifying, and deleting user groups and assigning permissions.
Settings for camera image, recording, audio, snapshots, and channel names.
Detailed configuration for recording quality, resolution, and frame rate.
Viewing hard drive information and recording status.
Information on system version, alarms, online users, and network traffic.
Testing network connectivity and viewing camera bitrates.
Searching and exporting system logs for analysis.
Setting up IP addresses using DHCP or static assignment.
Configuring system ports, essential for DDNS connectivity.
Configuring DDNS for remote access and setting up email alerts.
Configuring motion detection and other event-based system responses.
Managing settings for video loss detection and hard drive status warnings.
Configuring network warnings and managing storage parameters.
Setting custom schedules for video recording and snapshot capture.
Configuring special recording schedules for holidays.
Instructions for formatting and configuring hard drive types.
Adjusting miscellaneous system settings like language and display options.
Configuring monitor resolution and other display-related settings.
Saving current system settings to a USB flash drive.
Restoring the system to its original factory default settings.
Instructions for upgrading system firmware via USB.
Options for logging out, shutting down, or restarting the system.
Requirements and initial steps for connecting to the system over the Internet.
Guide to installing and using the FLIR Cloud client software.
Introduction to the FLIR Cloud client's home page and live view interface.
Details on live view controls, multi-monitor setup, and PTZ camera control.
Configuring PTZ presets, tours, patterns, and auto scans.
Accessing and controlling video playback using the FLIR Cloud client.
Viewing and managing system alarms and client software logs.
Creating and using e-maps for virtual camera placement.
Creating, modifying, and deleting user accounts with specific permissions.
Defining user roles and assigning permissions for role-based access control.
Configuring general client settings, log saving, and file paths.
Setting up audio alerts and checking client software version.
Prerequisites, connecting to the system, and live view interface on iPhone.
Controlling PTZ cameras, viewing local files, and using playback mode on iPhone.
Managing push notifications, event lists, and setting up favorite camera groups.
Using E-map, Device Manager, and IP/DDNS address for advanced connection.
Prerequisites, connecting to the system, and live view interface on iPad.
Controlling PTZ cameras, viewing local files, and using playback mode on iPad.
Managing push notifications, event lists, favorites, and e-maps on iPad.
Using Device Manager and IP/DDNS for advanced iPad connection.
Prerequisites, connecting to the system, and live view interface on Android.
Controlling PTZ cameras, viewing local files, and using playback mode on Android.
Managing push notifications, event lists, and favorite camera groups on Android.
Using E-map, Device Manager, and IP/DDNS for advanced Android connection.
Steps to connect the system to a router and find its local IP address.
Instructions to confirm system connectivity on the local network using client software.
Configuring port forwarding and creating a DDNS account for remote access.
Enabling DDNS on the system and connecting remotely using the DDNS address.
Connecting FLIR MPX PTZ cameras to the M3100 series system.
Controlling PTZ cameras directly from the DVR's local interface.
Basic and advanced controls for PTZ cameras including pan, tilt, zoom, focus, and iris.
Setting up camera presets, tours, and patterns for automated camera movements.
Configuring the auto scan feature for camera movement between points.
Step-by-step instructions for installing and removing the system's hard drive.
Guide on how to format hard drives to prepare them for system use.
A table listing common errors, their possible causes, and solutions.
Detailed technical specifications for the M3100 series system.
Statements regarding FCC/IC certification, modification policies, and RoHS compliance.
To Next Page
