FLIR M3100 SERIES - Preset, Tour, and Pattern Configuration

DDNS Setup (Advanced)
19
4. The client scans your LAN for connected systems. Check your system (a) and click
Add (b).
a
b
5. Enter the password for your system (default: 000000) and click OK.
6. If this is the first time you are connecting, you will be prompted to change the system
password.
7. Enter a new 6 character password and click OK. This password will be used to con-
nect to your system from now on.
8. Click then .
#LX400028; r. 1.0/16141/16141; en-US
143