EasyManuals Logo

FLIR M3104E User Manual

FLIR M3104E
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #165 background imageLoading...
Page #165 background image
M3100 Series Hard Drive Installation
21
4. Disconnect the SATA power and data cable from the hard drive.
5. Carefully turn the system over. Slide the hard drive and then lift it out of the system.
6. Replace the cover and cover screws (6x).
NOTE
After installation, you must format the hard drive in order to use it with the system. See 21.3 Format-
ting Hard Drives, page 155.
21.3 Formatting Hard Drives
You must format hard drives before you may use them with the system.
CAUTION
Formatting the HDD erases all data on the hard disk. This step cannot be undone. System settings will
not be erased.
To format the hard drive:
1. From the Main Menu, click
and then click Storage>HDD Manager.
#LX400028; r. 2.0/23335/23335; en-US
155

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR M3104E and is the answer not in the manual?

FLIR M3104E Specifications

General IconGeneral
Mobile AppFLIR Cloud
Power Supply12V DC
Channels4
CompressionH.264
Operating Temperature-10°C to 55°C (14°F to 131°F)

Related product manuals