427-0032-00-12, Version 170 Mar 2014 2-14
2 Basic Operation and Configuration
2.6.4 Services (Date and Time Settings)
The Services page is used to configure the date and time settings. The date, time, and time zone can
be obtained from an NTP server, or can be entered manually. If the NTP mode is selected, the NTP
server information can be entered. The NTP server address can be entered as a static address or can
be obtained via DHCP.
If the Custom mode is selected, a pop-up window allows the information to be entered manually.
Set the date and time parameters, then select the Save button at the bottom.
To Next Page
Loading...
