Need help?Do you have a question about the FLIR PT series and is the answer not in the manual?
General| Detector Type | Uncooled microbolometer |
|---|---|
| Environmental Rating | IP66 |
| Thermal Sensitivity | <50 mK |
| IP Rating | IP66 |
| Camera Resolution | 320x240 or 640x480 |
| Pan/Tilt Range | 360° continuous pan, +/-90° tilt |
| Video Output | NTSC or PAL composite video, Ethernet |
| Power | 24 VAC or PoE |
| Spectral Range | 7.5 - 13.5 μm |
| Resolution | 320 x 240, 640 x 480 |
| Frame Rate | 30 Hz |
| Power Supply | 24V AC or PoE |
| Interface | Ethernet |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Sensor Type | VOx Microbolometer |
Provides a general description of the PT-Series HD camera's features and capabilities.
Outlines the general installation process, requirements, and connection types for the PT-Series HD camera.
Details the available physical connection methods for video, power, and communication.
Explains the use and configuration of serial communication for camera control.
Lists the standard items included with the PT-Series HD camera.
Lists the additional items the installer must provide for installation.
Advises on selecting an appropriate installation site for optimal performance and access.
Describes procedures for testing the camera before final installation.
Covers the physical installation and mounting of the camera unit.
Explains the importance and procedure for galvanic isolation to prevent corrosion.
Details the critical steps for establishing a proper earth ground connection for safety.
Provides specific instructions for mounting the camera with the galvanic isolation kit.
Details how to connect various cables and interfaces to the camera.
Instructions on accessing the camera's internal connection points.
Guide on supplying electrical power to the camera unit.
Explains how to connect analog video outputs from the camera.
Details the process for establishing an IP network connection.
Describes how to connect and configure serial communication interfaces.
Explains configuration via hardware DIP switches for serial communication.
Instructions for correctly seating the gasket when reattaching the back cover.
Procedures for ensuring watertight cable entries using gland seals.
Lists the technical specifications for the PT-Series HD camera models.
Describes the camera's function as a network server supporting ONVIF Profile S.
Discusses methods for controlling the camera via serial or IP networks.
Covers essential network and server settings configuration for the camera.
Outlines how to perform initial testing of the camera's functionality.
Step-by-step guide to assigning an IP address using FLIR's DNA software.
Instructions for accessing and logging into the camera's web interface.
Describes the live video display and controls within the web interface.
Explains the camera's control indicators and user access for commands.
Details the interactive buttons and functions available on the web interface.
Covers common procedures for configuring camera settings.
Explains user roles and access levels for camera configuration.
Details advanced settings for GEO, camera, and surveillance zones.
Describes system maintenance tasks and server settings.
Outlines actions for managing firmware, configuration, and log files.
Explains the principles and characteristics of thermal imaging.
Provides solutions for common installation and operational problems.
Provides a table mapping serial addresses between decimal and binary formats.
To Next Page
