Need help?Do you have a question about the FLIR Ariel CM-3202-11-I and is the answer not in the manual?
General| Sensor Type | Uncooled VOx Microbolometer |
|---|---|
| Ingress Protection | IP66 |
| Camera Type | Thermal |
| Resolution | 320 x 240 pixels |
| Field of View | 24° x 18° |
| Frame Rate | 30 Hz |
| Thermal Sensitivity | <50 mK |
| Spectral Range | 7.5 - 13.5 µm |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) |
| Storage Temperature | -40°C to +70°C |
| Power Supply | 24 VAC |
Details the camera's advanced features, including its 3MP sensor, triple stream support, and compression capabilities.
Step-by-step guide for physically mounting the camera, including template use and securing the unit.
Instructions on accessing the camera's web interface via browser or DNA tool for configuration and operation.
Explains how to configure video stream profiles, codecs, resolutions, and frame rates for optimal quality and bandwidth.
Explains how to enable motion detection, define detection zones, and adjust sensitivity levels for alerts.
Covers network configuration, including IP modes, IPv6, QoS, UPnP, and DDNS settings.
Allows creation and configuration of alarm rules, including triggers, schedules, and actions for event-based alerts.
Manages security settings including certificates, SNMP, 802.1X, TLS/HTTPS, ports, and IP filtering for secure operation.
Covers camera firmware upgrades, factory resets, settings import/export, and downloading support packages for maintenance.
Offers solutions for common problems like network connection, IP address issues, video quality, and streaming problems.
To Next Page
