Configuration
CM-3202-11-I Installation and User Guide Revision 100
This document does not contain any export-controlled information.
5.14 Cyber Page
The Cyber page provides security configuration settings for:
• Certificates
• SNMP
• IEEE 802.1X-compliant communication
• Transport Layer Security (TLS) and secure HTTP (HTTPS) communication
• Ports
• IP Filtering
5.14.1 Certificates
Before you can enable SSL/TLS/HTTPS, you need to have a valid certificate installed in the camera.
You can generate a self-signed certificate, or you can upload a certificate issued by a Certificate
Authority (CA).
Figure 73: Cyber Page - Certificate Settings
To generate a self-signed certificate
1. Under Method, do one of the following:
• To generate a self-signed certificate, click Self-Signed.
• To generate a self-signed certificate and then be able to download it for future use, click
Request.
2. In the Certificate area, specify:
• Country Code: Specify the two-letter combination code for the country in which the certificate will
be used. For example, if you are generating a certificate to be used in the United States, enter
US.
• Province Name: Specify the state or province name.
To Next Page
Loading...
