Configuration
CM-3202-11-I Installation and User Guide Revision 100
This document does not contain any export-controlled information.
o Manual (default): The Server Address field appears. Specify the IP address of the NTP server
(default: time.nist.gov).
• Synchronization Period: Specify the frequency the camera synchronizes with the NTP server, in
number of hours between 1-24. For example, to synchronize the camera with the NTP server twice
per day, specify 12.
To apply changes, click Save. The new time appears as the Current Camera Time.
5.4 Users Page
On the Users page, users assigned the role of Admin can manage camera users and passwords. You
can create up to 10 users, in addition to the default administrator (admin user), which cannot be deleted.
Users assigned the role of Admin can also specify the authentication method on this page.
Figure 51: Users Page
You can assign one of the following roles to each user:
• User: Has access to the View Settings page but can only see the Live View window. Up to nine
users can be assigned the User role.
• Expert: Does not have access to the Users page. Has access to all other View Settings and System
Settings pages, menus, controls, and settings. More than one user can be assigned the Expert role.
• Admin: Has access to all pages. The default camera admin user is assigned the Admin role; the
admin user name and role cannot be modified; and the admin user cannot be deleted. More than
one user can be assigned the Admin role.
To add a new user
1. Click Add User.
Figure 52: Add User Dialog Box
2. Select a Role for the user.
3. Specify a unique User Name and a Password for the user. The user name cannot be admin.
To Next Page
Loading...
