FLIR A6700sc User Manual

A6700sc/A6750sc
User’s Manual
This document is controlled to FLIR Technology Level 2. The information contained in this document
pertains to a dual use product controlled for export by the Export Administration Regulations
(EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not
required prior to export or transfer to foreign persons or parties unless otherwise prohibited.
Document Number: 29249-000
Version: 5
Issue Date: February 2, 2015

FLIR A6700sc Specifications

General

Resolution	640 x 512
Thermal Sensitivity/NETD	<20 mK
Sensor Type	Uncooled VOx Microbolometer
Detector Type	Focal Plane Array (FPA)
Pixel Pitch	17 µm
Interface	Gigabit Ethernet
Power Requirements	24 VDC
Operating Temperature	-15°C to 50°C
Storage Temperature	-40°C to 70°C
Spectral Range	7.5 – 14.0 µm
Lens Options	25 mm, 50 mm, 100 mm (others available)
Temperature Range	-20°C to +1500°C (-4°F to +2732°F) (in multiple ranges)

Summary

INTRODUCTION

Key Features of A6700sc/A6750sc Cameras

Details the main functionalities and capabilities of the A6700sc/A6750sc cameras.

WARNINGS AND CAUTIONS

INSTALLATION

Basic Connections

Details the physical connections on the camera's back panel.

Power Connection

Instructions for connecting the power supply to the camera.

CAMERA CONTROLLER

ResearchIR Mini Controller

Overview of the basic Graphical User Interface for camera control.

Menu Bar and Controls

Setup Page

Details settings for integration time, frame rate, and sync.

Correction Page

Controls for managing on-camera Non-Uniformity Corrections (NUCs).

Video Page Settings

SPECIFICATIONS

Interface and Connectivity Specs

Performance and Acquisition Specs

Details acquisition modes, features, frame rates, and performance characteristics.

NUC and Detector Specifications

Specifies Non-Uniformity Correction capabilities and detector/FPA details.