Installing and Connecting the Camera
CM-3202-11-I Installation and User Guide Revision 100
This document does not contain any export-controlled information.
Gently place the top cover onto the camera body.
Figure 14: Attach Camera Cover
Fasten the three Torx screws clockwise to complete the mounting.
3.4 Powering the Camera
The camera can be powered by 12VDC or an 802.3af PoE (Class 3) connection over the unit’s network
cable. The following diagram shows how the camera can be powered using PoE.
Figure 15: PoE Connection
To Next Page
Loading...
