FLIR Ariel CM-3202-11-I - Ports; Figure 78: TLS;HTTPS Settings; Figure 79: Port Settings

Configuration
CM-3202-11-I Installation and User Guide Revision 100
June 2020
65
This document does not contain any export-controlled information.
Figure 78: TLS/HTTPS Settings
Enable SSL
The following settings are available:
Setting TLS Enabled
Access to the Camera
HTTPS HTTP
On Yes Yes Yes (can be disabled)
Off (default) No No Yes
HTTPS Only Yes Yes No
When this setting is On or HTTPS Only, you can define the HTTPS port as 443 (default) or between
1025-65535.
This setting affects whether the TLS and Web ports can be disabled or enabled (see Ports
).
5.14.5 Ports
For enhanced security, you can enable (On) and disable (Off) default ports, and email and FTP services.
Figure 79: Port Settings