FLIR Ariel CM-3202-11-I - Video Page Configuration

Operation
CM-3202-11-I Installation and User Guide Revision 100
June 2020
24
This document does not contain any export-controlled information.
The following information is displayed to the right of the Live View window:
• Streaming Format (all browsers) – MJPEG (JPEG, or J). With Internet Explorer, you can select
viewing the video on the web as H264 (ActiveX, or A) or as MJPEG (JPEG, or J).
• Stream Setting (Internet Explorer only) – Select one of up to three available video streams to appear
in the Live View window (streams 1, 2, or 3).
• Full Screen button (all browsers) – Click to maximize the current Live View window video stream.
• Microphone button (Internet Explorer only, when the Streaming Format is set to ActiveX) – Click to
enable the camera’s audio input.
• Speaker button (Internet Explorer only, when the Streaming Format is set to ActiveX) – Click to
enable the camera’s audio output.
The following information is displayed under the Live View window:
• Focus – To set Auto Focus, click Auto. To manually set the focus:
• Click the or buttons.
• Move the slider between Far (1) and Near (100).
• Zoom Control – To adjust the zoom:
• Click the or buttons.
• Move the slider between Wide (1.00) and Tele (3.00).
• Reset Lens – If Auto Focus does not produce a clear picture, click Reset. Then, under Focus, click
Auto. The image refocuses.
Click System Settings to open the System Settings pages and configuration options
.
4.3 Video Page
The camera provides the capability to configure three video stream profiles. Each profile supports three
concurrent streams. Each stream can be configured separately for optimized quality and bandwidth.
Each stream has its own settings, which can include Resolution; Compression and associated settings;
DSCP; Frame Rate; Rate Control; and Maximum Bit Rate.