Introduction
CM-3202-11-I Installation and User Guide Revision 100
This document does not contain any export-controlled information.
Interface Description
1 DEFAULT
To reset the camera to its factory defaults, press the Default button for
six seconds.
2 RESET To reboot the camera, press the Reset button for one second.
3 Micro SD card slot
For recording and file storage, insert a microSDXC card (up to 256 GB,
Class 10) in the card slot.
4 RS232 terminal block Not used.
2.6 System Requirements
Hardware
CPU i5-2430M CPU@ 2.40GHZ
RAM 6 GB or more
Display NVIDIA GeForce 6 Series or ATI Mobility Radeon 9500
Software
Operating System Microsoft Windows 7 SP1, 8, 8.1, and 10
Browser FLIR recommends using Google Chrome to access the camera's web page,
which also supports other browsers such as Firefox, Microsoft Edge, and
Internet Explorer 11 (32-bit).
Viewer ActiveX control plug-in for Microsoft Internet Explorer
Unit
Power Supply 12VDC or IEEE 802.3af PoE Class 3
Networking
Network Card 100Base-TX (100 Mbps) Ethernet via RJ-45 connector
To Next Page
Loading...
