Configuration
CM-3202-11-I Installation and User Guide Revision 100
This document does not contain any export-controlled information.
Notes:
• The password must consist of at least eight characters and include at least one uppercase
letter, one lowercase letter, one number, and one special character.
• The user name and password are case-sensitive.
4. Click Save. The new user appears in the list of users.
Users assigned the role of Admin can also:
• Modify the credentials of an existing user
• Delete an existing user
Figure 53: User Management
The default admin user cannot be deleted, and the admin user name cannot be modified.
Authentication Method
From the drop-down list, select one of the following authentication modes:
• Basic (default): Uses unencrypted base64 encoding. Basic Authentication should generally only
be used where transport layer security (TLS), such as HTTPS, is provided.
• Digest: Credentials are encrypted when transmitted; used over RTSP.
With either setting and under all circumstances, accessing the video stream requires providing
credentials.
To apply a change, click Save.
5.5 FTP Page
On the FTP screen, you can configure the settings of an FTP (File Transfer Protocol) server located
remotely on the network. Based on the settings on the Alarm Page
, the camera saves snapshots to this
FTP server.
To Next Page
Loading...
