Configuration
CM-3202-11-I Installation and User Guide Revision 100
This document does not contain any export-controlled information.
2. Do one of the following:
• If you are uploading a self-signed certificate, under Upload Certificate, click
.
• If you are uploading a CA certificate, under CA Certificate, click .
3. Browse for and select the certificate to upload.
4. Click Upload. Wait for the camera to upload the certificate, at which point the Certificate Information
appears on the screen.
5. Click Save to apply the changes.
5.14.2 SNMP
SNMP (Simple Network Management Protocol) enables the network management system (NMS) to
remotely monitor and manage the camera. You can enable the following SNMP versions and configure
their settings: SNMP v1, SNMP v2c, and SNMP v3.
If you are not sure how to configure the SNMP settings, contact your network or system administrator.
To apply changes to SNMP settings, click Save.
Figure 76: SNMP Settings
To Next Page
Loading...
