Appendices
CM-3202-11-I Installation and User Guide Revision 100
This document does not contain any export-controlled information.
Network Settings
The following are the network protocols and ports used by the camera:
Protocol Port Usage
FTP 21 Uploading files to the FTP server
HTTP 80 Sending commands, requests, replies and notifications
HTTPS 443
Using the secure socket protocols SSL/TLS over HTTP. HTTPS must be
enabled if your network uses SNMPv3.
Multicast
Streaming
As defined in
the units
Video/streaming (multicast). Uses the ONVIF address defined by the
Video Management System
Multicast UDP 9766 Unit self-publishing. Uses IP address 224.9.9.9
NTP 123 Time synchronization with a network time server using SNTP
RTSP 554 RTP session setup
RTP
2000 to
65535
Multimedia streaming
SNMP 161 IP management system
SNMP Trap port 162
Sending alarm event and exception messages to the surveillance
center
To Next Page
Loading...
