FLIR Ariel CM-3202-11-I - Figure 39: Privacy Zone Page; Figure 40: Three Privacy Zones Set up - Zone-1 Selected

Operation
CM-3202-11-I Installation and User Guide Revision 100
June 2020
38
This document does not contain any export-controlled information.
Figure 39: Privacy Zone Page
To set up a privacy zone
Move the Enable slider to the right. By default, privacy zones are disabled.
Select one of the eight privacy zones: Zone-1 through Zone-8.
From the Privacy Color Setting drop-down list, select Black (default), Grey, or White. The privacy
color setting applies to all zones.
Using your mouse, click and drag on the Live View window to draw the privacy zone.
Click Save. The privacy zone appears on the Live View window.
For each privacy zone you want to set up, repeat the steps above.
Figure 40: Three Privacy Zones Set Up - Zone-1 Selected