FLIR Ranger R Series - Figure 29 - Steps 3 & 4: Check Spur Gears; Figure 30 - Check Mechanical Components (R5, R5 D Shown)

910-0001-00-INS -R02 Page 50 of 53
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
Figure 29 - Steps 3 & 4: Check Spur Gears
Figure 30 - Check mechanical components (R5, R5D shown)
BASE
Gears in good
condition
Verify if
presence of
corrosion on
PCBs
Gore™ Vents
Total of 4 for R5, R5D
Total of 2 R1, R2, R3, R3D