910-0001-00-INS -R02 Page 52 of 53
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
Step 1 Remove the Gore Vents (4 for R5 and R5D; 2 for R1, R2, R3 and R3D) from the radar base
plate using a 16mm hex socket.
Step 2 Clean and dry the plate surface in contact with the Gore Membrane Vents.
Step 3 Screw the new Gore Membrane Vents back in place and torque the parts to 8 lbs-in using a
16mm socket.
To Next Page
Loading...
Need help?
General
