FLIR T560 User Manual

Camera settings
23
• Delete all saved files...: This displays a dialog box where you can choose to perma-
nently delete all the saved files (images and videos) from the memory card or to can-
cel the delete action.
23.5 Device settings
• Language, time & units: This submenu includes settings for a number of regional
parameters:
◦ Language.
◦ Temperature unit.
◦ Distance unit.
◦ Time zone.
◦ Date & time.
• Focus: This submenu includes the following settings:
◦ Autofocus: When autofocusing, the infrared camera can use one of the following
focus methods:
– Contrast: The focus is based on maximizing the image contrast.
– Laser: The focus is based on a laser distance measurement. The laser is on
when the camera is autofocusing.
◦ Continuous autofocus: This setting is used to enable/disable continuous autofocus.
• Display settings: This submenu includes the following settings:
◦ Screen rotation: This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
◦ Image overlay information: This setting specifies what image information the cam-
era will display as an overlay on the image. For more information, see section 6.5.6
Image overlay information. You can select the following information to display:
– Compass.
– Date & time.
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness: This submenu is used to control the brightness of the screen.
– Auto: Enable/disable automatic adjustment of the screen brightness.
– Slider: Manual adjustment of the screen brightness.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 6.5.5 Swipe-down menu.
• Geolocation: This submenu includes the following settings:
◦ GPS: This setting is used to enable/disable the GPS.
◦ Compass: This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 7.13 Calibrating the compass.
• Lamp & laser: This submenu includes the following settings:
◦ Enable lamp & laser: This setting is used to enable the camera lamp and the laser.
◦ Enable lamp & laser + Use lamp as flash: This setting is used to enable the flash
function. When the flash function is enabled, the camera lamp will flash when an
image is saved.
#T810253; r. AL/84068/84441; en-US
93

FLIR T560 Specifications

General

Brand	FLIR
Model	T560
Category	Thermographic Cameras
Language	English