FLIR T560 - Neck Strap; Hand Strap

Handling the camera
7
7.16 Neck strap
To attach the neck strap to the camera, use the two attachment points indicated in the
figure.
7.17 Hand strap
To replace the hand strap, follow this procedure:
1. Remove the battery.
2. Open the hook-and-loop fastener and remove the hand strap from the upper attach-
ment point.
3. Remove the two T6 screws.
4. Remove the hand strap from the bracket at the base of the camera.
#T810253; r. AL/84068/84441; en-US
35