Camera settings
23
The Settings menu includes the following:
• FLIR Ignite.
• Connections.
• Camera temperature range.
• Save options & storage.
• Device settings.
23.1 FLIR Ignite
Select FLIR Ignite and follow the on-screen instructions to sign in to your FLIR Ignite
account.
After sign in, the following is displayed:
• The FLIR Ignite user account that the camera is paired with.
• The amount of used and available storage space on the FLIR Ignite account.
• Auto upload switch: Toggle to enable/disable automatic upload of images.
For more information about FLIR Ignite and online storage of images, see section 9
Cloud connectivity.
23.2 Connections
• Wi-Fi: This setting defines Wi-Fi networks. For more information, see section 20 Con-
figuring Wi-Fi.
◦ Off: This setting is used to disable Wi-Fi.
◦ Share: This setting is used to set up the camera as a wireless access point.
◦ Connect to network: This setting is used to connect the camera to a Wi-Fi network.
• Bluetooth: This setting defines Bluetooth connectivity. For more information, see sec-
tion 21 Pairing Bluetooth devices.
• Advanced: This submenu includes the following settings:
◦ Global firewall: This setting is used to enable/disable the camera firewall.
Note
– It is recommended to keep the camera firewall enabled. Only disable the firewall
when experiencing problems connecting to legacy applications.
– To enable/disable the firewall for a shared network, see section 20.1 Setting up
a wireless access point.
◦ Trusted connections: List of trusted applications (which can make connections to
the camera).
23.3 Camera temperature range
For accurate temperature measurements, you must change the Camera temperature
range setting to suit the expected temperature of the object you are inspecting.
Available temperature range options are dependent on the camera model. The unit (℃
or ℉) depends on the temperature unit setting, see section 23.5 Device settings.
#T810413; r. AF/83467/83910; en-US
93
To Next Page
Loading...
Need help?
General
