Handling the camera
7
7.5 Adjusting the viewfinder’s dioptric
correction (sharpness)
CAUTION
Make sure that the beams from the intensive energy sources do not go into the viewfinder. The beams
can cause damage to the camera. This includes the devices that emit laser radiation, or the sun.
To adjust the viewfinder’s dioptric correction, look through the viewfinder and rotate the
adjustment knob clockwise or counter-clockwise for the best sharpness.
Note
• Maximum dioptric correction: +1.
• Minimum dioptric correction: –3.
7.6 Adjusting the angle of lens
To adjust the angle, tilt the lens up or down.
#T810413; r. AF/83467/83910; en-US
24
To Next Page
Loading...
Need help?
General
