Recording video clips
17
17.1 General
You can record and save video clips to the memory card.
Note The camera can be configured to save video in *.mpg or *.csq format. Select
(Settings) > Save options & storage > Video compression.
• Mpeg (*.mpg): Mpeg recordings cannot be edited after the file has been saved.
• Radiometric storage (*csq): A *.csq file supports full radiometry but is only supported
by FLIR Systems software. The file does not include any visual image information.
With this setting, only the image modes Thermal and Macro are supported when re-
cording video. If any non-supported image mode is active when Video recording
mode is selected, the camera will auto-switch to Thermal image mode.
17.2 Recording a video clip
1. Push the navigation pad to display the menu system.
2. Select
(Recording mode) and push the navigation pad. This displays a submenu.
3. Select
(Video) and push the navigation pad.
4. To start a recording, push the Save button. A counter at the top of the screen displays
the duration of the recording.
5. To stop a recording, push the Save button. The recording is automatically saved to
the image archive.
17.3 Playing a saved video clip
1. Push the image archive button . This displays the Gallery with one or more
folders.
2. Select a folder and push the navigation pad.
3. Select the video clip you want to play and push the navigation pad.
4. Push the navigation pad to display the top toolbar.
5. On the top toolbar, select the
icon and push the navigation pad.
6. To play or pause the video clip, push the navigation pad.
#T810413; r. AF/83467/83910; en-US
77
To Next Page
Loading...
Need help?
General
