3 Introduction
Congratulations on your purchase of the FLIR VP50/VP52 non-contact AC volt-
age detector. Proper use and care of this meter will provide many years of reli-
able service.
The portable, rugged FLIR VP50/VP52 can detect the presence of AC voltage at
an electrical outlet, junction strip, circuit, or other device without actually touching
the device under test (FLIR VP50: Minimum excitation voltage is 90 V AC; FLIR
VP52: Minimum excitation voltage is 190 V AC). The FLIR VP50/VP52 includes a
high-sensitivity mode that can be used to detect low-level AC voltage signals
down to a minimum of 24 V AC. The vibrating and visual cues alert the user to the
presence of AC voltage. The bright built-in light systems permit operation in dimly
lit areas.
#T559851; r. AG/ 10041/10041; en-US 6
To Next Page
Loading...
