PARAMETER 17 – MINIMUM FAN SPEED SETTING
6. Use buttons ‘+’ o ‘-’ to modify the value of the parameter between: min
= 33 Hz ; max = value of parameter 18
The default value is :
- 60 Hz for Natural Gas;
- 60 Hz for propane;
7. Press and release button ‘S’ to confirm. The parameter number (17)
will appear in the display.
8. Switch off the appliance and switch it back on again to render the
new parameter operative.
P
ARAMETER 18 – MAXIMUM FAN SPEED SETTING
6.
Use buttons ‘+’ o ‘-’ to modify the value of the parameter between:
min
= value of parameter 17; max = 202 Hz.
The default value is:
- 155 Hz for Natural Gas;
- 143 Hz for propane;
7. Press and release button ‘S’ to confirm. The parameter number (18)
will appear in the display.
8. Switch off the appliance and switch it back on again to render the
new parameter operative.
P
ARAMETER 19 – MINIMUM FAN SPEED SETTING
C
ENTRAL HEATING MODE
6. Use buttons ‘+’ o ‘-’ to modify the value of the parameter between:
min = 33 ; max = value of parameter 18.
The default value is:
- 60 Hz for Natural Gas;
- 60 Hz for propane;
7. Press and release button ‘S’ to confirm. The parameter number (19)
will appear in the display.
8. Switch off the appliance and switch it back on again to render the
new parameter operative.
P
ARAMETER 20 – MAXIMUM FAN SPEED SETTING
C
ENTRAL HEATING MODE
6. Use buttons ‘+’ o ‘-’ to modify the value of the parameter between:
min = value of parameter 17; max = 202 Hz.
The default value is:
- 155 Hz for Natural Gas;
- 143 Hz for propane;
7. Press and release button ‘S’ to confirm. The parameter number (20)
will appear in the display.
8. Switch off the appliance and switch it back on again to render the
new parameter operative.
To Next Page
Loading...