Flowserve FRBH - Nameplate and Warning Labels

FRBH, FRBHX AND FRBHS USER INSTRUCTIONS ENGLISH 71569178 20-08
Page 9 of 60 flowserve.com
®
1.7 Nameplate and warning labels
1.7.1 Nameplate
For details of nameplate, see the Declaration of Conformity or separate documentation included with these
User Instructions
1.7.2 Warning labels
MECHANICAL SEAL WARNING ROTATION WARNING
P/N 2113931-001 P/N 2113932-001
GROUT WARNING LIFTING WARNING
P/N 2113934-001 P/N 9901701-001
LUBRICATION WARNING – QF-440-R01 (2124841)
Oil lubricated units only:
MECHANICAL SEAL FITTED
DO NOT ADJUST PUMP CLEARANCE
WITHOUT REFERENCE TO
MANUFACTURER’S INSTRUCTION MANUAL
BEFORE STARTING THE PUMP ON SERVICE,
CHECK TO ENSURE CORRECT ROTATION OF
MOTOR. FAILURE TO DO THIS COULD RESULT
IN SERIOUS DAMAGE TO THE EQUIPMENT.
BEFORE GROUTING, REALIGN THIS UNIT.
RECHECK ALIGNMENT BEFORE STARTING,
FAILURE TO DO THIS COULD RESULT IN
SERIOUS DAMAGE TO THE EQUIPMENT.
REFER TO INSTALLATION MANUAL AND, OR
COUPLING INSTRUCTIONS FOR METHOD OF
CHECKING ALIGNMENT.
THESE EYEBOLTS
ARE TO BE USED FOR LIFTING BEARING
CARTRIDGE AND SHAFT ONLY.
DO NOT USE FOR LIFTING ENTIRE UNIT