Flowserve 6LR-18A User Manual

SUBMITTAL FOR APPROVAL
JEA WEST NASSAU HIGH SERVICE PUMPS
SPECIFICATION SECTION #11216, #16150, & #01010
TWO (2) FLOWSERVE MODEL 6LR-18A LARGE HIGH SERVICE PUMPS
WITH 150HP, 1800RPM, TEFC INVERTER RATE MOTORS.
OWNER: Jacksonville Electric Authority
21 W. Church Street
Jacksonville, FL 32202
Attn: Allan Boree
ENGINEER: CDM Smith
8381 Dix Ellis Trail, Suite 400
Jacksonville, FL 32256
Attn: Dave Rasmussen
MANUFACTURER: Flowserve Pump Division
3900 Cook Boulevard
Chesapeake, VA 23323
Attn: Rainier Cruz
SUPPLIER: Carter & VerPlanck, Inc.
4910 West Cypress Street
Tampa, Florida 33607
813-287-0709
Attn: Yaricel Garcia
February 1, 2017
C&V Project #FL16029

Flowserve 6LR-18A Specifications

General

Brand	Flowserve
Model	6LR-18A
Category	Water Pump
Language	English

Summary

SECTION 1: SHIPPING METHOD

SECTION 2: COMMENTS & CLARIFICATIONS CERTIFICATE OF COMPLIANCE

I. CLARIFICATIONS

Specific points of clarification for the pump's scope of work.

II. EXCLUSIONS

Items explicitly excluded from the manufacturer's scope of work.

III. COORDINATION NOTES/COMMENTS

Notes and comments related to coordination of different specification sections.

SECTION 4: PUMP PERFORMANCE DATA PERFORMANCE CURVE FORCES & MOMENTS

Hydraulic Datasheet

Detailed operating conditions and performance parameters for the pump.

SECTION 5: MATERIAL LIST & CROSS SECTIONAL DRAWING MECHANICAL SEAL DRAWING COUPLING DATA SPARE PARTS SUPPLIED

MATERIAL LIST

List of all parts used in the pump assembly and their materials.

SPARES PARTS SUPPLIED

Information regarding spare parts provided with the pump.

SECTION 6: MANUFACTURER’S WARRANTY

SECTION 7: SURFACE PREPARATION & COATING SYSTEM

Pump Shop Coating Information

Details on the coating system applied to the pump interior and exterior.

SECTION 8: MOTOR GENERAL ARRANGEMENT DRAWING & DATA

SECTION 9: PUMP INSTALLATION OPERATION & MAINTENANCE MANUAL