Need help?Do you have a question about the Flowserve 10M234 and is the answer not in the manual?
General| Brand | Flowserve |
|---|---|
| Model | 10M234 |
| Category | Water Pump |
| Language | English |
General instructions for product use, installation, and safety.
Details on CE marking and relevant directives for machinery.
Specifies product selection based on purchase order and application.
Critical safety information, warnings, and precautions.
Information on nameplates and important warning labels.
Guidelines and data on pump noise levels and measurement.
Procedures for checking equipment upon receipt and unpacking.
Instructions for safe lifting of pumps using cranes and personnel.
Recommendations for short-term and long-term pump storage.
Overview of different pump configurations and features.
Detailed description of key pump components and their design.
Data on operating limits, speed, and torque curves.
Guidelines for selecting an appropriate pump installation location.
Requirements for pump and driver foundations and anchor bolts.
Steps for correctly installing the baseplate and initial levelling.
Procedures for aligning pump and driver shafts.
Guidelines for suction, discharge, and auxiliary piping.
Safety and regulatory requirements for electrical connections.
Identifying and applying correct lubrication methods.
Ensuring correct pump and motor rotation direction.
Steps for priming the pump and checking auxiliary systems.
Procedures for safely starting the pump.
Guidelines for normal pump operation and monitoring.
Procedures for safely stopping and shutting down the pump.
Operator responsibility for maintenance, safety, and procedures.
Recommended checks and tasks for pump maintenance.
Specifications for tightening torques of various fasteners.
Step-by-step instructions for disassembling the pump.
Inspection guidelines for pump components after disassembly.
Procedures for reassembling the pump after maintenance.
How to adjust impeller axial clearance.
Troubleshooting guide for pump faults and their causes.
Detailed troubleshooting for mechanical issues.
Troubleshooting guide for motor electrical faults.
Illustrated parts list for standard duty frames 1 & 2.
Illustrated parts list for standard duty frames 1&2 with expeller.
Illustrated parts list for standard duty frames 3 & 4.
Illustrated parts list for standard duty frames 3&4 with expeller.
Illustrated parts list for severe duty frames 2,3 & 4.
Illustrated parts list for severe duty frames 3&4 with expeller.
Illustrated parts list for severe duty frames 5&6.
Illustrated parts list for severe duty frames 5&6 with expeller.
Information on certificates for CE marking and ATEX.
Details on supplementary manuals for installation and operation.
References to further technical documentation and standards.
To Next Page