To Next PageTo Next Page
Need help?Do you have a question about the Flowserve 5LR-15D and is the answer not in the manual?
General| Model | 5LR-15D |
|---|---|
| Manufacturer | Flowserve |
| Category | Water Pump |
| Seal Type | Mechanical seal |
| Flow Rate | 150 GPM |
| Capacity | 150 GPM |
| Inlet Size | 2 inches |
| Outlet Size | 2 inches |
| Housing Material | Cast Iron |
| Impeller Material | Bronze |
| Shaft Material | Stainless steel |
| Operating Temperature | -20°F to 250°F |
Details on how the pump equipment is shipped and handled.
Details on specific points, guarantees, testing, delivery, and scope of work.
Items not included in the scope of work or responsibilities.
Confirmation that pump equipment meets specified sections and addendums.
Detailed dimensional drawing of the pump and driver assembly.
Specific identification details for the pump equipment.
Detailed performance specifications, operating conditions, and graphical representation.
Table of maximum forces and moments allowed on pump flanges.
List of materials used for pump components, including casing, impeller, and motor.
Detailed cross-sectional views of pump components and assemblies.
Diagram illustrating the mechanical seal assembly and components.
Dimensional data for the Flowserve Type T10 coupling.
Information regarding spare parts for the pump unit.
Technical details for the interior pump casing coating.
Technical details for the exterior pump coating.
Details on motor configuration, specifications, and approval package information.
Data on motor load, efficiency, power factor, and performance curves.
Overview of the manual, safety symbols, and general precautions.
Procedures for unpacking, storing, and handling motors.
Guidance on location, mounting, and electrical connections for motor installation.
Steps for starting, running, and shutting down the motor safely.
Procedures for cleaning, lubrication, and inspection of motor components.
Chart for diagnosing and resolving common motor operational problems.
Information on ordering replacement parts and tightening torques for fasteners.
