Assembly instructions
B
Use Part
B-1
1.Preparation
3.Install top shell
4.Assembly belt
2.Install optical axis
Open package All the components
for assembly
Place the Bottom shell Insert optical axis through
slider to shaft seat bottom
Belt must be in the middle
of two axis
Logo and touch screen
are at the same direction
Align all axis with seat
holes then press to bottom
Upper shell completed
Untie the belt and
straighten it to make sure
they are parallel.
Insert the metal pulley
into the slot
Make screw head and nut
are at the same height
The same method installs
other belts
Optical axis completed
All screws and wrenches
for assembly
5
6
To Next Page
Loading...
