UNFOLDING & FOLDING
Unfolding
1. Press the rear mud guard to release the hook and move the stem
upward into riding position.
2. You should hear a click when the bolt snaps into place.
3. Pull the safety lever outward and move it over the bolt so that the
scooter cannot fold when accidentally pushing the folding lever.
4. Open the Quick Release Lever below the handlebar and pull the
handlebar upwards. It will lock into the first height setting.
5. To increase handlebar height, press in the height button and move
the handlebar higher.
6. Close the quick release lever and ensure it sits tight. Adjust tightness
with the quick release screw if necessary.
7. Move the handle grips into upward position. They will snap into place.
Safety Lever
(shown in open
position
Height Button to
adjust handlebar
height
To Next Page
Loading...
