SCOOTER MAINTENANCE & TRANSPORT
• The Mosquito is essentially maintenance free. Apart from monitoring.
tire and brake wear, and occasional re-greasing of moving parts, you
should be good to go.
• Once the tire is significantly worn or the brakes loose tension, contact
fluidfreeride.
• Every few hundred miles, or when you hear squeaking, use a silicone
based grease spray to lightly lubricate moving parts (see images below)
• Never perform maintenance on this product while the unit is powered
on or charging. Always power off before performing maintenance.
• Unless otherwise provided or instructed, do not attempt to perform
repairs, or modify the scooter but contact your place of purchase or
refer to a professional repair facility. You understand and agree that
any repairs, modifications, or maintenance which you perform or have
performed are at your sole and exclusive risk.
• Clean stains on your scooter’s body with a damp cloth. Do not use
alcohol, gasoline, kerosene or other corrosive and volatile chemicals. Do
not wash with high pressure cleaners. Make sure the scooter is turned
off and unplugged during cleaning and ensure no moisture enters the
charging port.
• When transporting your scooter, please consider that it contains
lithium-ion batteries that are considered a hazardous material.
• Always exercise caution and follow applicable rules and regulations
when transporting your scooter. It is very likely that you will not be
allowed to take your scooter including battery on a plane.
Please contact us at fluidfreeride.com/contact for any
assistance with maintenance.
To Next Page
Loading...
