OPERATION AND RIDING
*Controller temperature may show lower than rom temperature when turning your scooter,
it will show accurate temperature once riding your scooter.
Basic Controls
Press the power button for 3 seconds, the scooter will turn on and the
display lights up. While the display is starting up, you will see current
battery voltage displayed in the bottom right corner.
Press the power button again for 3 seconds to turn off your scooter.
Press the horn button to sound a horn sound while the scooter is turned
on. Hold the button to sound multiple horn sounds.
Press the light button to turn on the head- and taillights. If lights are off,
the taillight will only light up when the brake is activated.
Press the settings button to toggle between TRIP mileage and total
ODOmeter mileage. The trip mileage resets to zero with each power off.
Horn Button Light Button Settings Button Power Button
To Next Page
Loading...
