FW_E110_AutoUnitConv_002_EN Page 1
E-SERIES
Flow rate indicator / Totalizer
E110-SERIES TUTORIAL
AUTOMATIC UNIT CONVERSION
This E110-series tutorial is meant as a step-by-step guidance on how to use and
set the automatic unit conversion. This tutorial is an addendum to the installation
manual that came with the E-series.
This E110-series tutorial assumes that the E-series is in a safe area.
E-series - Explosion proof indicators for hazardous areas.
More info: www.fluidwell.com/eseries
To Next Page
Need help?
General
