Fluidwell F115-P

F115-P
BIDIRECTIONAL FLOW RATE INDICATOR / TOTALIZER
with analog, pulse, and flow direction outputs
Signal inputs flowmeters: pulse, Namur and coil
Signal outputs: (0)4-20mA / 0-10V ref. flow rate, pulse ref. total and flow
direction
Options: Intrinsically safe, Modbus communication and backlight
F-Series - Field mounted indicators for safe and hazardous areas.
More info: www.fluidwell.com/fseries

Fluidwell F115-P Specifications

General

Display Type	LCD
Protection Class	IP66 / NEMA 4X
Display Feature	Backlight
Type	Flow Rate Indicator / Totalizer
Input Type	Pulse/Frequency
Intrinsically Safe	Yes (ATEX, IECEx certified)
Outputs	4-20 mA, pulse, frequency
Housing Material	Aluminum
Mounting	Panel, Wall, Pipe
Certifications	ATEX, IECEx, CSA, FM
Measurement Principle	Pulse counting
Display Digits	8

Summary

Safety Instructions

Safety Rules and Precautions

Essential safety guidelines and precautionary measures for operating the device safely and correctly.

2 Operational

2.3 Operator Information and Functions

Details on how the F115-P operates at Operator level and its available functions.

3 Configuration

3.2 Programming Setup-Level

Accessing and navigating the F115-P's setup menu for configuration.

3.2.3 Programming Sequence

3.3 Configuration Settings

3.3.8 Menu 7 - Flowmeter

3.3.9 Menu 8 - Analog Output

3.3.10 Menu 9 - Pulse Output

3.3.11 Menu A - Communication (Option)

4 Installation

4.5 Electrical Installation

4.5.1 Electrical Safety

Important electrical safety measures and general wiring directions to follow during installation.

4.5.2 Protective Earth (PE) Connections

Detailed instructions for making proper Protective Earth connections for safety and equipment protection.

4.5.3 Field Wiring Connections

4.5.4 Power Supply Wiring

4.5.5 Sensor Supply

4.6 Terminal Connectors Safe Area Applications - Type XX XF

4.6.1 Terminal 00-02: Power Supply

4.6.4 Terminal 07-08: Analog Output

4.6.5 Terminal 09-11: Flowmeter A Input

4.6.7 Terminal 26-31: Type CT - Communication (Option)

5 Intrinsically Safe Applications

5.2 Electrical Installation in Hazardous Area

5.2.2 Installations Based on ATEX or IECEX Certificate

5.2.3 Electrical Data - Annex 1

5.2.4 Power Supply Wiring

5.2.5 Sensor Supply

5.3 Terminal Connectors Intrinsically Safe Applications - Type XI

5.3.1 Terminal 26-29: Type CT - Communication

5.4 Configuration Examples Intrinsically Safe Applications

6 Maintenance

6.2 Instructions for Repair

6.3 Battery Replacement Instructions

6.3.1 Safety Instructions

Critical safety guidelines to follow when handling and replacing batteries to prevent hazards.

6.3.2 Replace the Battery

Appendix B Problem Solving