Fluke 101 - Accuracy Specifications

101
Users Manual
20
Accuracy Specifications
Accuracy is specified for 1 year after calibration, at operating temperature range of 18 °C to
28 °C, relative humidity at 0 % to 90 %. Accuracy specifications take the form of: ±([% of
Reading] + [Number of Least Significant Digits])
Function Range Resolution Accuracy
AC Volts
(40 Hz to 500 Hz)
[1]
v
6.000 V
60.00 V
600.0 V
0.001 V
0.01 V
0.1 V
1.0 % + 3
DC Volts
V
6.000 V
60.00 V
600.0 V
0.001 V
0.01 V
0.1 V
0.5 % + 3
AC Millivolts
(40 Hz to 500 Hz)
[1]
u
600.0 mV 0.1 mV 3.0 % + 3
Diode Test
[2]
G
2.000 V 0.001 V 10 %
[1] All AC, Hz, and duty cycle are specified from 1 % to 100 % of range. Inputs below 1 % of range are not specified.
[2] Typically, open circuit test voltage is 2.0 V and short circuit current is <0.6 mA.