Fluke 1508 - User Interface and Controls; Buttons and Indicators

Insulation Testers
Buttons and Indicators
5
Table 2. Rotary Switch Selections
Switch
Position
Measurement Function
b
AC or DC voltage from 0.1 V to 600.0 V.
o
Ohms from 0.01 Ω to 20.00 kΩ.
f
e
250V
100V
50V
Ohms from 0.01 MΩ to 10.0 GΩ.
Performs insulation tests with 50, 100, 250,
500 and 1000 V.
XWWarning
To avoid shock, injury, or damage to the
Tester, use only accessories with 1000 V CAT
III or 600 V CAT IV rating.
Buttons and Indicators
Use the buttons to activate features that augment the
function selected with the rotary switch. There are also two
indicators on the front of the Tester which light up when
active. The buttons and indicators are shown in Figure
and described in Table .
bbv02f.eps
Figure 2. Buttons and Indicators