MegOhmMeter
Key functions
7
Table 1 (continued)
N
Resistance Beeper function
Turns the Beeper function ON and OFF. When ON, the
R
icon appears on
the display and the Meter beeps at short circuit.
Z
Low Resistance function
Turns the test lead resistance compensation ON.
The
X
icon appears on the display. To compensate, touch the probe tips
together, then press and hold ZERO until the Meter beeps. The main display
indicates 0.00.
C
Backlight button
Turns the display backlight ON and OFF.
To Next Page
Loading...
Need help?
General
