Need help?Do you have a question about the Fluke 15B MAX and is the answer not in the manual?
General| Max Voltage Measurement (AC) | 1000 V |
|---|---|
| Max Voltage Measurement (DC) | 1000 V |
| Max Current Measurement (AC/DC) | 10 A |
| Resistance Measurement | 40 MΩ |
| Frequency Measurement | 100 kHz |
| Data Hold | Yes |
| Backlight | Yes |
| Duty Cycle | Yes |
| Continuity | Yes |
| Diode Test | Yes |
| Display | LCD |
| Capacitance Measurement | 1000μF |
| Safety Rating | CAT IV 600 V |
| Temperature Range | 0 °C to +40 °C |
Brief overview of the digital multimeters and their capabilities.
Information on how to contact Fluke for local support and inquiries.
Identifies hazardous conditions and procedures dangerous to the user.
Description of the product terminals and their functions.
How to use and disable the auto sleep feature.
How to disable the auto backlight off function.
Warning about preventing electrical shock during measurements.
How to use manual and auto range selection modes.
How to use the data hold function safely.
How to perform relative measurements.
How to set the product to MIN/MAX mode.
Steps for measuring AC and DC voltage.
Steps for measuring AC or DC current.
Explains the Input Alert feature and its warnings.
Steps for measuring electrical resistance.
How to perform continuity tests.
How to test diodes with the multimeter.
Steps for measuring capacitance.
How to measure temperature using a K type thermocouple.
How to measure frequency and duty cycle.
Explanation of the hazardous voltage alert LED.
How to perform general cleaning and maintenance.
Procedure to test the internal fuses of the product.
Steps for replacing batteries and fuses.
Information on product service and replacement parts.
How to test small components and use leads in CAT III applications.
General operating and physical specifications of the product.
Information on the product's electromagnetic compatibility standards.
Detailed accuracy specifications for voltage measurements.
Detailed accuracy specifications for current measurements.
Detailed accuracy for diode, temp, resistance, capacitance, frequency, duty cycle.
Defines the threshold for continuity testing.
Details input impedance and rejection ratios for various functions.
To Next Page
