1
Introduction
The Fluke Model 1587 FC, Model 1587, and Model 1577 are battery-powered,
true-rms insulation multimeters (hereafter, Meter or UUT) with a 6000-count and
a 3 ¾ digit display. Although this manual contains calibration information for
Models 1587 FC, 1587, and 1577, all illustrations and examples assume use of
the Model 1587 FC. Table 1 provides a description of all the symbols used in this
manual.
The Meter meets CAT III and CAT IV IEC 61010 standards. The IEC 61010
standard defines four measurement categories (CAT I to IV) based on the
magnitude of danger from transient impulses. CAT III meters are designed to
protect against transients in fixed equipment installations at the distribution level;
CAT IV meters are designed to protect against transients from the primary supply
level (overhead or underground utility service).
Contacting Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke’s website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals
To Next Page
Loading...
