®
PN 1600476 March 2001 Rev.4, 8/06
© 2001-2006 Fluke Corporation. All rights reserved. Printed in U.S.A.
1
175, 177, & 179
True RMS Multimeters
Calibration Information
Introduction
XWWarning
To avoid electric shock or injury, do not perform the performance tests or
calibration adjustment procedures unless qualified to do so.
The information provided in this document is for the use of qualified personnel
only.
The 175, 177, & 179 Calibration Information provides the information necessary to adjust and verify the
performance of the Fluke Models 175, 177, and 179 True RMS Multimeters (hereafter known as the
Meter).
The following information is included in this document:
• Safety Information and International Electrical Symbols (page 2)
• Test Lead Alert (page 3)
• Specifications (pages 4-6)
• Testing and Replacing the Fuses (pages 7-8)
• Replacing the Battery (page 8)
• Cleaning (page 9)
• Replacing the LCD (page 9-10)
• Performance Tests (pages 10-15)
• Calibration Adjustment (pages 15-18)
• User-Replaceable Parts and Accessories (pages 19-20)
• Complete Warranty (page 21)
See the 175, 177, & 179 Users Manual for complete operating instructions.
Service Information
To contact Fluke, call one of the following telephone numbers:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's Web site at www.fluke.com
.
To register your product, visit register.fluke.com
To Next Page
