Fluke 175 - Test Lead Alert

True RMS Multimeters
International Electrical Symbols
3
International Electrical Symbols
The following international symbols appear in this document and on the Meter.
B
AC (Alternating Current)
J
Earth ground
F
DC (Direct Current)
I
Fuse
F
B
AC or DC
P
Conforms to European Union directives
W
Risk of danger. Important Information.
Refer to the manual.
$
Conforms to relevant Canadian Standards
Association directives
X
Hazardous Voltage
T
Double insulated
s
Technischer Überwachungs Verein.
German certifying body.
!
Underwriters Laboratories, Inc.
Meter in accordance with IEC 61010-1. 54CJ
b
Battery. Low Battery when shown on
display.
;
N10140
Conforms to relevant Australian standards
#
Verband Deutscher Electroniker. German electronics association.
Test Lead Alert
XWWarning
Personal injury or damage to the Meter can occur if the user attempts to make a
measurement with a lead in an incorrect terminal.
As a reminder to check that the test leads are in the correct terminals, LEAd is displayed when the Rotary
Switch is moved to or from the
mA or A position.