True-rms Digital Multimeter
Ex Safety Information
3
XW Warning
To prevent electric shock or personal injury
while in Ex-HAZARDOUS areas, follow these
guidelines:
• Do not open the Product while in an
Ex-hazardous area.
• Change the Product’s batteries only
outside Ex-hazardous areas.
• Do not take spare batteries into
Ex-hazardous areas.
• Use only type-approved batteries in the
Product. See item 5.1 in the Safety
Information for a list of approved
batteries.
• Do not replace fuses while in an
Ex-hazardous area.
• Use only fuses approved for
Ex-hazardous areas in this Product. See
item 5.3 in the Safety Information for a
list of approved fuses.
• Use the Product only when the specified
connection values are met.
• After you use the Product on a non-i.s.
protected circuit, wait 3 minutes before
you take the Product into an
Ex-hazardous area.
• The Product must be completely and
securely fitted in the red holster while it
is in an Ex-hazardous area.
• Use only approved accessories with this
Product in Ex-hazardous areas.
• Do not use the Product in aggressive
acidic or alkaline solutions. For
applications requiring Group I
equipment, avoid permanent contact of
the Product with oil, hydraulic fluid, or
grease.
• Do not use the Product in zones 0, 20,
21, or 22. Measurements on intrinsically
safe connections that go into these
zones are permitted, if the connection
values are met.
To Next Page
Loading...
