10
Clamp Meter
Maintenance
Maintenance
The Product does not require routine maintenance.
XW
Warning
To prevent possible electrical shock, re, or personal injury:
• Remove the input signals before you clean the Product.
• Repair the Product before use if the battery leaks. Battery leakage may create a shock
hazard or damage the Product.
• Use only specied replacement parts.
• Have an approved technician repair the Product.
• Remove the batteries if the Product is not used for an extended period of time, or if stored
in temperatures above 50 °C. If the batteries are not removed, battery leakage may result.
How to Clean the Case
Wipe the case with a damp cloth and mild detergent.
W
Caution
Do not use abrasives, isopropyl alcohol, or solvents to clean the case or
lens/window.
Environmental
This Product has electronic printed circuit boards. Dispose of the Product in a professional and
environmentally appropriate manner. Delete personal data on the Product before disposal.
Remove batteries that are not integrated into the electrical system before disposal and dispose of
batteries separately.
If this Product has an integral battery, put the entire Product in the electrical waste.
See Contact Fluke for more information.
Service
Have an authorized Fluke Calibration service center service the Product at one-year intervals to
maintain optimum performance. Contact your equipment distributor or authorized Fluke Calibration
Service Center for any equipment performance failure or to schedule regular maintenance service.
See Contact Fluke for more information.
Table 4 is a list of the available replacement parts.
Table 4. Replacement Parts
Item Quantity Fluke Part Number
BATTERY AAA1.5V PACKING 1 5128983
Battery Door 1 5336951
TL75, Test lead with two caps 1 4306653