Fluke 319 Instructions

5
 Do not use in CAT III or CAT IV environments without the
protective cap installed on test probe. The protective cap
decreases the exposed probe metal to <4 mm. This
decreases the possibility of arc flash from short circuits.
For safe operation and maintenance of the product:
 Remove batteries to prevent battery leakage and damage
to the Product if it is not used for an extended period.
 Be sure that the battery polarity is correct to prevent
battery leakage.
 Repair the Product before use if the battery leaks.
 Have an approved technician repair the Product.
 Remove the input signals before you clean the Product.
Symbols
The table below lists the symbols that can be used on the Product or
in this document.
Symbol Description

Consult user documentation.

WARNING. RISK OF DANGER.

WARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.

Application and removal from hazardous live
conductors permitted.

Double insulated
B
Low battery

Fluke 319 Specifications

General

Category	Clamp Meter
AC Voltage Range	0.1 V to 600 V
DC Voltage Range	0.1 V to 600 V
Continuity	≤ 30 Ω
Safety Rating	CAT III 600 V
Battery Type	2 x AAA
AC Voltage Accuracy	±1.5% + 5 digits
Display	LCD
AC Current Accuracy	±2% ±5 digits
DC Current Accuracy	±2% ±5 digits