EasyManuals Logo

Fluke 381 User Manual

Fluke 381
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
381
Users Manual
8
off and on, the user is encouraged to try to correct the interference by one or more of the
measures that follow:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
The term "IC:" before the radio certification number only signifies the device meets Industry's
Canada technical specifications.
Features
The following sections explain the Meter features in detail. See Figure 2 and Table 2.
Remote Display
The Meter uses low-power 802.15.4 wireless technology to let the display module operate in a
different location than the Meter base. Although there is control of some Meter functions (Hold,
MIN MAX AVG, and Backlight), complete remote control of the Meter is not available through the
display module.
The wireless radio signal does not hinder Meter measurements. Usually, the radio signal is off
when the display module is docked to the Meter base. It is possible for the radio signal to be on
when the display module is docked and the Rotary Function Switch is set to OFF. To make sure
that the radio signal is off, remove the batteries from the Meter base and display module.
The display module is synchronized with a Meter base when it is docked on the Meter base and
turned on. Different display modules can be synchronized with a Meter base but, only one display
module can be synchronized to a Meter base at the same time.

Other manuals for Fluke 381

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 381 and is the answer not in the manual?

Fluke 381 Specifications

General IconGeneral
Continuity60 Ω
Resistance (max)600 Ω
Resistance (min)6 Ω
Measuring categoryCAT III 1000V, CAT IV 600V
AC voltage resolution (min)600 V
AC current maximum resolution (probe)2500 A
Product colorYellow
Operating altitude0 - 2000 m
Non-operating altitude0 - 12000 m
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)0 - 90 %
Probe length1800 mm
Carrying caseYes
Probe diameter7.5 mm
Weight and Dimensions IconWeight and Dimensions
Depth277 mm
Width88 mm
Height43 mm
Weight350 g

Related product manuals