Remote Display True-rms Clamp Meter
Features
15
Item Description
J
Zero/Shift button: removes dc offset from dc current measurements. Also used to
shift and corresponds to the yellow items on the Rotary Function Switch.
K
Inrush button: push to enter inrush mode. Push a second time to exit inrush mode.
Integration time is 100 ms.
L Jaw release
M
Alignment marks: to meet accuracy specifications, the conductor must be aligned
with these marks.
N Common terminal
O Volts/Ohm input terminal
P Flexible Current Probe input terminal
To Next Page
Loading...
