Fluke 437-II - Page 18

Fluke 434-II/435-II/437-II
Users Manual
2-2
- Unbalance (14),
- Inrush Currents (15),
- Power Quality Monitoring (16).
- Flicker (17),
- Transients (18),
- Power Wave (19),
- Mains Signaling (20),
- Logger (21).
- Shipboard V/A/Hz (22)
• Chapter 23. Cursor and Zoom: how to investigate measurement details.
• Chapter 24. Setting up the Analyzer: a comprehensive explanation of adjustments to
customize measurements.
• Chapter 25. Using Memory and PC: how to save, recall and delete screenshots and
data formats. How to make hard copies of measurement results and setup of
communication with PC.
• Chapter 26. Tips and Maintenance: Cleaning, Storage, Batteries, Installation of
options, Replaceable parts, Troubleshooting.
• Chapter 27. Specifications: Electrical, Mechanical, and Safety characteristics.
• Appendices: Measurement principles of Power Measurement and Energy Loss
Calculation, Installing USB Drivers, Instrument Security Procedures (English only).
Remark: for a Material Safety Data Sheet (MSDS) or Compliance Information on the
supplied Li-ion Battery Pack refer to Fluke’s website.
• Index.
1.800.868.7495info@Fluke-Direct.ca
Fluke-Direct.ca